Guide 01 · Sourcing
Self-adhesive vinyl manufacturer in Taiwan: 7 things to check before you order
Coater or trader? The six-step coating line, and seven questions any supplier should answer before you order.
4 min read→
Guide 02 · Film selection
Cast vs calendered vinyl: which film for which job
How each film is made, a side-by-side table, six questions that place any job, and where every MAXDECAL series sits.
4 min read→
Guide 03 · Ordering
MOQ, roll sizes and how to order vinyl by the roll
One roll is the minimum on most film series. Every series’ roll width × length in one table, what ships by the box, and the four steps to a quotation.
4 min read→
Guide 04 · Durability
How to read a vinyl durability rating: vertical, horizontal, indoor, outdoor
What the four numbers in a rating mean, what shortens them, and how to get the figure that applies to your climate and surface.
5 min read→
Guide 05 · Print systems
Print film + overlaminate: which laminate goes on which film
Cold lamination in plain terms, thin vs thick laminates, and the print film + laminate pairs in the MAXDECAL range.
6 min read→
Guide 06 · Safety & visibility
Reflective sheeting grades: engineering, high-intensity, diamond, conspicuity
The five reflective grades side by side, which one each job needs, and how to order them by the roll.
5 min read→